[C11] Integer types allows three representations for signed integral types:
See §5 C Signed Integer Wording for full wording.
C++ goes further than C and only requires that "the representations of integral types shall define values by use of a pure binary numeration system". To the author’s knowledge no modern machine uses both C++ and a signed integer representation other than two’s complement (see §6 Survey of Signed Integer Representations). None of [MSVC], [GCC], and [LLVM] support other representations. This means that the C++ that is taught is effectively two’s complement, and the C++ that is written is two’s complement. It is extremely unlikely that there exist any significant codebase developed for two’s complement machines that would actually work when run on a non-two’s complement machine.
C and C++ as specified, however, are not two’s complement. Signed integers currently allow the existence of an extraordinary value which traps, extra padding bits, integral negative zero, and introduce undefined behavior and implementation-defined behavior for the sake of this extremely abstract machine.
Let’s stop pretending that the abstract machine should represent integers as signed magnitude or ones' complement. These theoretical implementations are a different programming language, not our real-world C++. Developers who require signed magnitude or ones' complement integers would be better served by a pure-library solution, and so would the rest of us.
This paper proposes the following:
Status-quo Signed integer arithmetic remains non-commutative in general (though some implementations may guarantee that it is).
boolis represented as
true. All other representations are undefined.
boolonly has value bits, no padding bits.
Change Signed integers are two’s complement.
Change If there are M value bits in the signed type and N in the unsigned type, then M = N-1 (whereas C says M ≤ N).
Status-quo If a signed operation would naturally produce a value that is not within the range of the result type, the behavior is undefined. The author had hoped to make this well-defined as wrapping (the operations produce the same value bits as for the corresponding unsigned type), but WG21 had strong resistance against this.
Change None of the integral types have extraordinary values.
Change C11 note 53 has wording aroung trap representations within padding bits, e.g. for parity bits. C++ has no such wording.
Change Conversion from signed to unsigned is always well-defined: the result is the unique value of the destination type that is congruent to the source integer modulo 2N.
Change Conversion from enumeration type to integral is the same as that of converting from the enumeration’s underlying type and then to the destination type, even if the original value cannot be represented by the specified type.
Status-quo Conversion from integral type to enumeration is unchanged: if the original value is not within the range of the enumeration values the behavior is undefined.
Change Left-shift on signed integer types produces the same results as left-shift on the corresponding unsigned integer type.
Change Right-shift is an arithmetic right shift which performs sign-extension.
Status-quo shift by larger-than or equal-to bit-width remains undefined.
constexprevaluation of signed integer arithmetic with undefined result is not a core constant expression.
Change the range of enumerations without a fixed underlying type is simplified because of two’s complement.
is_modulotype trait remains
falsefor signed integer types unless an implementation chooses to defined overflow as wrap.
booland signed integer types, in addition to unsigned integer types and others before.
Status-quo atomic operations on signed integer types continues not to have undefined behavior, and is still specified to wrap as two’s complement (the definition is clarified to act as-if casting to unsigned and back).
Change address [LWG3047] to remove undefined behavior in pre-increment atomic operations.
This proposal leaves C unchanged, it merely restricts further the subset of C which applies to C++. Aaron Ballman volunteered to present this paper and the corresponding [N2218] to WG14, in the hope that C will approve compatible changes. The WG14 feedback is summarized in §7 WG14 Feedback from the Brno Meeting.
A final argument to move to two’s complement is that few people spell "ones' complement" correctly according to Knuth [TAoCP]. Reducing the nerd-snipe potential inherent in C++ is a Good Thing™.
Detail-oriented readers and copy editors should notice the position of the apostrophe in terms like “two’s complement” and “ones’ complement”: A two’s complement number is complemented with respect to a single power of 2, while a ones’ complement number is complemented with respect to a long sequence of 1s. Indeed, there is also a “twos’ complement notation,” which has radix 3 and complementation with respect to (2 . . . 22)3.
2. Edit History
2.1. r1 → r2
Update with feedback from WG14, available in §7 WG14 Feedback from the Brno Meeting.
2.2. r0 → r1
This paper was presented in Jacksonville to:
A joint SG6 numerics and SG12 undefined behavior session
The Evolution Working Group
The following polls were taken, and corresponding modifications made to the paper. The main change between [P0907r0] and the subsequent revision is to maintain undefined behavior when signed integer overflow occurs, instead of defining wrapping behavior. This direction was motivated by:
Performance concerns, whereby defining the behavior prevents optimizers from assuming that overflow never occurs;
Implementation leeway for tools such as sanitizers;
Data from Google suggesting that over 90% of all overflow is a bug, and defining wrapping behavior would not have solved the bug.
It is expected that this paper have little to no effect on code generation from current compilers. Known codegen changes should have no performance implication, for example:
Older x86 vector instructions don’t support arithmetic right shift, and therefore must remain scalar instead of vectorizing to non-arithmetic right shift.
An implementation which implements left shift using a rotate now need to also mask.
2.2.1. SG6 / SG12
|Change anything with respect to signed integers.||2||10||5||1||0|
|Moving any change from this paper to IS’20 is blocked on synchronizing with WG14.||4||9||4||0||1|
|Change the default unsigned integral types' behavior.||0||0||1||8||9|
|Changes we make constrain extended integral types.||10||4||2||0||1|
|Allow extraordinary value for signed integral types.||2||2||9||2||3|
We decided to independently conside what the "privileged" syntax' behavior should be when going out of range for:
cast of enums
INT_MIN / -1
addition / subtraction / multiplication and
Multiple answer poll would you be OK with these being the standards-mandated behavior for the "privileged" syntax behavior of signed integral types when going out of range:
1—generate extraordinary value
5—Rust-style wrap or trap, maybe contract violation?
9—intermediate values are mathematical integers (e.g.
(int)a+(int)b > INT_MAXwould be OK)
|Cast to enums outside of the enum’s representable range should be defined instead of undefined behavior.||0||1||1||5||8|
|Cast from ||6||6||3||0||1|
|We want two’s complement representation for signed types, regardless of what WG14 decides.||7||4||2||0||3|
Multiple answer poll addition / subtraction / multiplication and
-INT_MIN overflow is currently undefined behavior, it should instead be:
6—wrap or trap
5—intermediate values are mathematical integers
14—status quo (remain undefined behavior)
Multiple answer poll to opt-in to the other behaviors (both for
unsigned) we can create library or language changes. What should we explore
separately from this paper?
3—generate extraordinary value
10—Rust-style wrap or trap, maybe contract violation?
9—intermediate values are mathematical integers (e.g.
(int)a+(int)b > INT_MAXwould be OK)
14—operations with a bool set when overflow has occurred
|Shifting out of range ||2||7||5||1||1|
|Left shift should be the same for ||6||5||5||0||1|
|Right shift on a signed integral type should be an arithmetic shift (which sign-extends).||9||4||3||1||0|
|In C ||1||0||2||3||12|
The Evolution Working Group took the following polls:
|Disallow extraordinary value (trapping / NaN) for signed integral types.||16||12||7||1||2|
|Does EWG want to move signed integers to two’s complement, as presented in the current paper (without extraordinary values)?||11||17||7||2||1|
|Move to Core.||7||8||12||8||4|
The resolution on disallowing extraordinary values overrides the lack of consensus for change from SG6 / SG12.
The decision to not forward to Core was mainly motivated on hearing back from WG14. WG14 met in Brno, discussed [N2218], and provided feedback detailed in §7 WG14 Feedback from the Brno Meeting. EWG will see the paper again in Rappersvil, and will likely forward to Core at that point in time given the outcome of the next-to-last poll.
3. Proposed Wording
Leave the note in Program execution [intro.execution] ❡8 as-is:
[Note: Operators can be regrouped according to the usual mathematical rules only where the operators really are associative or commutative. For example, in the following fragmentint a, b; /* ... */ a = a + 32760 + b + 5;
the expression statement behaves exactly the same asa = (((a + 32760) + b) + 5);
due to the associativity and precedence of these operators. Thus, the result of the sum
(a + 32760)is next added to
b, and that result is then added to 5 which results in the value assigned to
a. On a machine in which overflows produce an exception and in which the range of values representable by an
[-32768, +32767], the implementation cannot rewrite this expression asa = ((a + b) + 32765);
since if the values for
bwere, respectively, -32754 and -15, the sum
a + bwould produce an exception while the original expression would not; nor can the expression be rewritten either asa = ((a + 32765) + b);
ora = (a + (b + 32765));
since the values for
bmight have been, respectively, 4 and -8 or -17 and 12. However on a machine in which overflows do not produce an exception and in which the results of overflows are reversible, the above expression statement can be rewritten by the implementation in any of the above ways because the same result will occur. —end note]
Modify Fundamental types [basic.fundamental] ❡4 onwards:
Unsigned integers shall obey the laws of arithmetic modulo 2n where n is the number of bits in the value representation of that particular size of integer.
This implies that unsigned arithmetic does not overflow because a result that cannot be represented by the resulting unsigned integer type is reduced modulo the number that is one greater than the largest value that can be represented by the resulting unsigned integer type.
wchar_tis a distinct type whose values can represent distinct codes for all members of the largest extended character set specified among the supported locales. Type
wchar_tshall have the same size, signedness, and alignment requirements as one of the other integral types, called its underlying type. Types
char32_tdenote distinct types with the same size, signedness, and alignment as
uint_least32_t, respectively, in
<cstdint>, called the underlying types.
Values of type
false†. [Note: There are no
long booltypes or values. —end note] Values of type
boolparticipate in integral promotions.
† Using a
boolvalue in ways described by this International Standard as “undefined”, such as by examining the value of an uninitialized automatic object, might cause it to behave as if it is neither
We need to define the storage for
boolsince we define signed and unsigned below, and that excludes
bool. The definition I propose is more restrictive than what we had before because it only allows two values to be represented, and doesn’t allow padding bits. This guarantees that
boolis trivially-copyable, and gives it a unique object representation, which as far as I know all compilers already guaranteed.
wchar_t, and the signed and unsigned integer types are collectively called integral types. A synonym for integral type is integer type.
The representations of integral types shall define values by use of a pure binary numeration system‡. [Example: This document permits two’s complement, ones' complement and signed magnitude representations for integral types. —end example]
‡ A positional representation for integers that uses the binary digits 0 and 1, in which the values represented by successive bits are additive, begin with 1, and are multiplied by successive integral power of 2, except perhaps for the bit with the highest position. (Adapted from the American National Dictionary for Information Processing Systems.)
An intermediate revision of this paper stated "Value bits are store contiguously in memory" in an attempt to preserve different endiannesses, and otherwise restricts implementations to "sane" layout. However, that change wasn’t presented to EWG and received pushback on the SG6 reflector. Would this be a desirable addition, should it be in a separate paper, or does it overconstrain implementations?
note M = N-1, whereas C says M ≤ N. I derive this from "For each of the standard signed integer types, there exists a corresponding (but different) standard unsigned integer type [...] each of which occupies the same amount of storage".
In C11 implementation requirements call it the "extraordinary value" and refer to 22.214.171.124 which calls it "is a trap representation or a normal value". Furthermore, in note 53 there’s wording around extraordinary values being held in padding bits (not just as a value stolen from the value representation), and since C++ wording used to only talk about "binary representation" it’d rather be very clear about the absence of extraordinary values. It’s unclear whether SG6 / SG12 guidance explicitly wanted to disallow padding bits from being special and trapping. I propose disallowing it.
Modify Integral conversions [conv.integral] ❡1 onwards:
A prvalue of an integer type can be converted to a prvalue of another integer type. A prvalue of an unscoped enumeration type can be converted to a prvalue of an integer type.
If the destination type is unsigned, the resulting value is the least unsigned integer congruent to the source integer (modulo 2n where n is the number of bits used to represent the unsigned type). [Note: In a two’s complement representation, this conversion is conceptual and there is no change in the bit pattern (if there is no truncation). —end note] If the destination type is signed, the value is unchanged if it can be represented in the destination type; otherwise, the value is implementation-defined.
Modify Static cast [expr.static.cast] ❡9 onwards:
A value of a scoped enumeration type can be explicitly converted to an integral type
. When that type is cvA value of a scoped enumeration type can also be explicitly converted to a floating-point type; the result is the same as that of converting from the original value to the floating-point type.
bool, the resulting value is
falseif the original value is zero and
truefor all other values. For the remaining integral types, the value is unchanged if the original value can be represented by the specified type. Otherwise, the resulting value is unspecified.
the above change is for enumeration to integer, which SG6 did not object to changing as suggested. It states the conversion in terms of the updated [conv.integral] rules.
A value of integral or enumeration type can be explicitly converted to a complete enumeration type. If the enumeration type has a fixed underlying type, the value is first converted to that type by integral conversion, if necessary, and then to the enumeration type. If the enumeration type does not have a fixed underlying type, the value is unchanged if the original value is within the range of the enumeration values, and otherwise, the behavior is undefined. A value of floating-point type can also be explicitly converted to an enumeration type. The resulting value is the same as converting the original value to the underlying type of the enumeration, and subsequently to the enumeration type.
the above unmodified paragraph is for integer to enumeration which SG6 voted to leave undefined in poll "Cast to enums outside of the enum’s representable range should be defined instead of undefined behavior".
Modify Shift operators [expr.shift] ❡1 onwards:
The operands shall be of integral or unscoped enumeration type and integral promotions are performed. The type of the result is that of the promoted left operand. The behavior is undefined if the right operand is negative, or greater than or equal to the length in bits of the promoted left operand.
The value of
E1 << E2is
E2bit positions; vacated bits are zero-filled.
Ifvalue of the result is E1×2E2, reduced modulo
E1has an unsigned type, the
one more than the maximum value representable in the result type. Otherwise, if
E1has a signed type and non-negative value, and E1×2E2 is representable in the corresponding unsigned type of the result type, then that value, converted to the result type, is the resulting value; otherwise, the behavior is undefined.
updated to reflect poll "Left shift should be the same for signed and unsigned".
The value of
E1 >> E2is
Ifvalue of the result is
E1has an unsigned type or if
E1has a signed type and a non-negative value, the
the integral part of the quotient of
E1has a signed type and a negative value, the resulting value is implementation-defined.
Leave Constant expressions [expr.const] ❡2 as-is:
eis a core constant expression unless the evaluation of
e, following the rules of the abstract machine, would evaluate one of the following expressions:
an operation that would have undefined behavior as specified in Clause 4 through 19 of this document [Note: including, for example, signed integer overflow, certain pointer arithmetic, division by zero, or certain shift operations —end note]
Modify Enumeration declarations [dcl.enum] ❡8:
For an enumeration whose underlying type is fixed, the values of the enumeration are the values of the underlying type. Otherwise, for an enumeration where emin is the smallest enumerator and emax is the largest, the values of the enumeration are the values in the range bmin to bmax, defined as follows:
Let K be 1 for a two’s complement representation and 0 for a ones' complement or sign-magnitude representation.bmax is the smallest value greater than or equal to max(|emin| - K, |emax|) and equal to 2M-1, where M is a non-negative integer. bmin is zero if emin is non-negative and -(bmax+ K) otherwise. The size of the smallest bit-field large enough to hold all the values of the enumeration type is max(M,1) if bmin is zero and M+1 otherwise. It is possible to define an enumeration that has values not defined by any of its enumerators. If the enumerator-list is empty, the values of the enumeration are as if the enumeration had a single enumerator with value 0.
numeric_limits members [numeric.limits.members] ❡61 onwards as-is:
static constexpr bool is_modulo;
trueif the type is modulo. A type is modulo if, for any operation involving
*on values of that type whose result would fall outside the range
[min(), max()], the value returned differs from the true value by an integer multiple of
max() - min() + 1.
falsefor signed integer types unless an implementation, as an extension to this document, defines signed integer overflow to wrap. —end example]
Meaningful for all specializations.
Modify Type properties [meta.unary.prop] ❡9 as follows:
The predicate condition for a template specialization
has_unique_object_representations<T>shall be satisfied if and only if:
Tis trivially copyable, and
any two objects of type
Twith the same value have the same object representation, where two objects of array or non-union class type are considered to have the same value if their respective sequences of direct subobjects have the same values, and two objects of union type are considered to have the same value if they have the same active member and the corresponding members have the same value.
The set of scalar types for which this condition holds is implementation-defined. [Note: If a type has padding bits, the condition does not hold; otherwise, the condition holds true for unsigned integral types. —end note]
this was missing from P0907r0. Adding signed here seems like a no-brainer. GCC and LLVM currently return
bool(and it currently isn’t implemented in MSVC). Try it out.
Modify Class template
ratio [ratio.ratio] ❡1 as follows:
If the template argument
Dis zero or the absolute values of either of the template arguments
Dis not representable by type
intmax_t, the program is ill-formed. [Note: These rules ensure that infinite ratios are avoided and that for any negative input, there exists a representable value of its absolute value which is positive.
In a two’s complement representation, thisexcludes the most negative value. —end note]
Modify Specializations for integers [atomics.types.int] ❡7 and ❡8 as follows:
Remarks: For signed integer types,
arithmetic is defined to use two’s complement representation.There are no undefined results
the operations this applies to are add, or, and, sub, xor, and is only meaningful for add and sub.T operator op=(T operand) volatile noexcept; T operator op=(T operand) noexcept;
Effects: Equivalent to:
return fetch_key(operand) op operand;
there’s an outstanding defect report for this [LWG3047], whose resolution should be updated as above.
4. Out of Scope
This proposal focuses on the representation of signed integers, and on tightening the specification when that representation is constrained to two’s complement. It is out of scope for this proposal to deal with related issues which have more to them than simply the representation of signed integers.
A non-comprehensive list of items left purposefully out:
Left and right shift with a right-hand-side equal to or wider than the bit-width of the left-hand-side.
Integral division or modulo by zero.
Integral division or modulo of the signed minimum integral value for a particular integral type by minus one.
Overflow of pointer arithmetic.
Library solution for ones' complement integers.
Library solution for signed magnitude integers.
Library solution for two’s complement integers with trapping or undefined overflow semantics.
Language support for explicit signed overflow truncation such as Swift’s (
&*), or complementary trapping overflow operators.
Library or language support for saturating arithmetic.
Mechanism to let the compiler assume that integers, signed or unsigned, do not experience signed or unsigned wrapping for:
A specific integral variable.
All integral variables (à la
A specific loop’s induction variable.
Mechanism to have the compiler list places where it could benefit from knowing that overflow cannot occur (à la
Endianness of integral storage (or endianness in general).
Bits per bytes, though we all know there are eight.
These items could be tackled in separate proposals, unless the committee wants them tackled here. This paper expresses no preference in whether they should be addressed or how.
5. C Signed Integer Wording
The following is the wording on integers from the C11 Standard.
For unsigned integer types other than unsigned char, the bits of the object representation shall be divided into two groups: value bits and padding bits (there need not be any of the latter). If there are N value bits, each bit shall represent a different power of 2 between 1 and 2N−1, so that objects of that type shall be capable of representing values from 0 to 2N − 1 using a pure binary representation; this shall be known as the value representation. The values of any padding bits are unspecified.
For signed integer types, the bits of the object representation shall be divided into three groups: value bits, padding bits, and the sign bit. There need not be any padding bits;
signed charshall not have any padding bits. There shall be exactly one sign bit. Each bit that is a value bit shall have the same value as the same bit in the object representation of the corresponding unsigned type (if there are M value bits in the signed type and N in the unsigned type, then M ≤ N). If the sign bit is zero, it shall not affect the resulting value. If the sign bit is one, the value shall be modified in one of the following ways:
the corresponding value with sign bit 0 is negated (sign and magnitude);
the sign bit has the value −(2M) (two’s complement);
the sign bit has the value −(2M − 1) (ones’ complement).
Which of these applies is implementation-defined, as is whether the value with sign bit 1 and all value bits zero (for the first two), or with sign bit and all value bits 1 (for ones’ complement), is a trap representation or a normal value. In the case of sign and magnitude and ones’ complement, if this representation is a normal value it is called a negative zero.
If the implementation supports negative zeros, they shall be generated only by:
>>operators with operands that produce such a value;
%operators where one operand is a negative zero and the result is zero;
compound assignment operators based on the above cases.
It is unspecified whether these cases actually generate a negative zero or a normal zero, and whether a negative zero becomes a normal zero when stored in an object.
If the implementation does not support negative zeros, the behavior of the
>>operators with operands that would produce such a value is undefined.
The values of any padding bits are unspecified. A valid (non-trap) object representation of a signed integer type where the sign bit is zero is a valid object representation of the corresponding unsigned type, and shall represent the same value. For any integer type, the object representation where all the bits are zero shall be a representation of the value zero in that type.
The precision of an integer type is the number of bits it uses to represent values, excluding any sign and padding bits. The width of an integer type is the same but including any sign bit; thus for unsigned integer types the two values are the same, while for signed integer types the width is one greater than the precision.
6. Survey of Signed Integer Representations
Here is a non-comprehensive history of signed integer representations:
John von Neumann suggested use of two’s complement binary representation in his 1945 First Draft of a Report on the EDVAC proposal for an electronic stored-program digital computer.
The 1949 EDSAC, which was inspired by the First Draft, used two’s complement representation of binary numbers.
Early commercial two’s complement computers include the Digital Equipment Corporation PDP-5 and the 1963 PDP-6.
The System/360, introduced in 1964 by IBM, then the dominant player in the computer industry, made two’s complement the most widely used binary representation in the computer industry.
The first minicomputer, the PDP-8 introduced in 1965, uses two’s complement arithmetic as do the 1969 Data General Nova, the 1970 PDP-11.
Many early computers, including the CDC 6600, the LINC, the PDP-1, and the UNIVAC 1107.
Successors of the CDC 6600 continued to use ones' complement until the late 1980s.
Descendants of the UNIVAC 1107, the UNIVAC 1100/2200 series, continue to do so, although ClearPath machines are a common platform that implement either the 1100/2200 architecture (the ClearPath IX series) or the Burroughs large systems architecture (the ClearPath NX series). Everything is common except the actual CPUs, which are implemented as ASICs. In addition to the IX (1100/2200) CPUs and the NX (Burroughs large systems) CPU, the architecture had Xeon (and briefly Itanium) CPUs. Unisys' goal was to provide an orderly transition for their 1100/2200 customers to a more modern architecture.
The IBM 700/7000 series scientific machines use sign/magnitude notation, except for the index registers which are two’s complement.
Wikipedia offers more details and has comprehensive sources for the above.
Thomas Rodgers surveyed popular DSPs and found the following:
SHARC family ships a C++ compiler which supports C++11, and where signed integers are two’s complement.
Texas Instruments ships a C++ compiler which supports C++14, and where signed integers are two’s complement.
CML Microcircuits has fixed ASIC for radio processing, and doesn’t seem to support C++.
Synaptics (formerly Connexant) makes audio input subsystem for voice assistants. The DSP runs fixed far-field signal processing algorithms and has programmable functions which run on standard ARM controller, using Raspbian.
In short, the only machine the author could find using non-two’s complement are made by Unisys, and no counter-example was brought by any member of the C++ standards committee. Nowadays Unisys emulates their old architecture using x86 CPUs with attached FPGAs for customers who have legacy applications which they’ve been unable to migrate. These applications are unlikely to be well served by modern C++, signed integers are the least of their problem. Post-modern C++ should focus on serving its existing users well, and incoming users should be blissfully unaware of integer esoterica.
7. WG14 Feedback from the Brno Meeting
WG14 met in Brno to discuss [N2218]. The paper was received very positively, especially given that no one in the room knew of an extant architecture that was not two’s complement for which there was a reasonably modern C compiler. The closest anyone came was the Unisys ClearPath compiler documentation which says:
Two’s complement arithmetic is used on many platforms. On ClearPath MCP systems, arithmetic is performed on data in signed-magnitude form. This can cause discrepancies in algorithms that depend on the two’s complement representation.
However, this compiler documentation also says that they only target C90, and was last updated on 2017.
There was worry about the search on impacted architectures not having been exhaustive. Given that WG14 will ship the IS in 5 years, it was felt that making them aware now should give vendors plenty of time to bring up reasons why this change would be bad for them.
It was pointed out that C already has cases that require two’s complement.
It was noted that the existing implementation latitude is a burden for library developers because they have to consider test cases where integers are not two’s complement but they have no way to actually exercise any of those test cases.
The following straw poll was taken:
|Remove (not deprecate) non-two’s complement representations for signed integers.||14||0||3|