P1135R4
The C++20 Synchronization Library

Published Proposal,

Authors:
(NVIDIA)
(NVIDIA)
(Apple)
(NVIDIA)
Source:
GitHub
Issue Tracking:
GitHub
Project:
ISO/IEC JTC1/SC22/WG21 14882: Programming Language — C++
Audience:
LWG

1. Introduction

This paper is the unification of a series of related C++20 proposals for introducing new synchronization and thread coordination facilities and enhancing existing ones:

2. Changelog

Revision 0: Post Rapperswil 2018 changes from [P0514R4], [P0666R2], and [P0995R1] based on Rapperswil 2018 LEWG feedback.

Revision 1: Pre San Diego 2018 changes based on Rapperswil 2018 LEWG feedback and a June discussion on the LEWG and SG1 mailing lists.

Revision 2: San Diego 2018 changes to incorporate [P1258R0] and pre-meeting feedback.

Revision 3: Pre Kona 2019 changes based on San Diego 2018 LEWG feedback.

Revision 4: Lots of wording changes based on Kona 2019 LWG feedback. Three design changes to fix bugs that were discovered during LWG review or afterwards while revising the paper. These will be presented to SG1 in a separate paper (yet to be written) in Cologne.

3. Wording

Note: The following changes are relative to the post San Diego 2018 working draft of ISO/IEC 14882, ([N4791]).

Note: The � character is used to denote a placeholder number which shall be selected by the editor.

Add <semaphore>, <latch>, and <barrier> to Table 19 "C++ library headers" in [headers].

Modify the header synopsis for <atomic> in [atomics.syn] as follows:

30.2 Header <atomic> synopsis [atomics.syn]
namespace std {
  // ...
  
  // 30.8, non-member functions
  // ...
  template<class T> 
    void atomic_wait(const volatile atomic<T>*, 
                     typename atomic<T>::value_type);
  template<class T> 
    void atomic_wait(const atomic<T>*,
                     typename atomic<T>::value_type);
  template<class T> 
    void atomic_wait_explicit(const volatile atomic<T>*, 
                              typename atomic<T>::value_type, 
                              memory_order);
  template<class T> 
    void atomic_wait_explicit(const atomic<T>*, 
                              typename atomic<T>::value_type,
                              memory_order);
  template<class T> 
    void atomic_notify_one(volatile atomic<T>*);
  template<class T> 
    void atomic_notify_one(atomic<T>*);
  template<class T> 
    void atomic_notify_all(volatile atomic<T>*);
  template<class T> 
    void atomic_notify_all(atomic<T>*);
 
  // 30.3, type aliases
  // ...
   
  using atomic_intptr_t       = atomic<intptr_t>;
  using atomic_uintptr_t      = atomic<uintptr_t>;
  using atomic_size_t         = atomic<size_t>;
  using atomic_ptrdiff_t      = atomic<ptrdiff_t>;
  using atomic_intmax_t       = atomic<intmax_t>;
  using atomic_uintmax_t      = atomic<uintmax_t>;
 
  using atomic_signed_lock_free   = see below;
  using atomic_unsigned_lock_free = see below;
 
  // ...

  // 30.9, flag type and operations
  struct atomic_flag;
  bool atomic_flag_test(const volatile atomic_flag*) noexcept;
  bool atomic_flag_test(const atomic_flag*) noexcept;
  bool atomic_flag_test_explicit(const volatile atomic_flag*, memory_order) noexcept;
  bool atomic_flag_test_explicit(const atomic_flag*, memory_order) noexcept;
  bool atomic_flag_test_and_set(volatile atomic_flag*) noexcept;
  bool atomic_flag_test_and_set(atomic_flag*) noexcept;
  bool atomic_flag_test_and_set_explicit(volatile atomic_flag*, memory_order) noexcept;
  bool atomic_flag_test_and_set_explicit(atomic_flag*, memory_order) noexcept;
  void atomic_flag_clear(volatile atomic_flag*) noexcept;
  void atomic_flag_clear(atomic_flag*) noexcept;
  void atomic_flag_clear_explicit(volatile atomic_flag*, memory_order) noexcept;
  void atomic_flag_clear_explicit(atomic_flag*, memory_order) noexcept;
  void atomic_flag_wait(const volatile atomic_flag*, bool) noexcept;
  void atomic_flag_wait(const atomic_flag*, bool) noexcept;
  void atomic_flag_wait_explicit(const volatile atomic_flag*, bool, memory_order) noexcept;
  void atomic_flag_wait_explicit(const atomic_flag*, bool, memory_order) noexcept;
  void atomic_flag_notify_one(volatile atomic_flag*) noexcept;
  void atomic_flag_notify_one(atomic_flag*) noexcept;
  void atomic_flag_notify_all(volatile atomic_flag*) const noexcept;
  void atomic_flag_notify_all(atomic_flag*) const noexcept;
  #define ATOMIC_FLAG_INIT see below

  // 30.10, fences
  extern "C" void atomic_thread_fence(memory_order) noexcept;
  extern "C" void atomic_signal_fence(memory_order) noexcept;
}

Modify [atomics.alias] as follows:

30.3 Type aliases [atomics.alias]
The type aliases atomic_intN_t, atomic_uintN_t, atomic_intptr_t, and atomic_uintptr_t are defined if and only if intN_t, uintN_t, intptr_t, and uintptr_t are defined, respectively.
The type aliases atomic_signed_lock_free and atomic_unsigned_lock_free are specializations of atomic whose template arguments are integral types, respectively signed and unsigned, other than bool. In freestanding implementations (4.1), these aliases are optional. Only implementations that provide an integral specialization of atomic other than bool for which is_always_lock_free is true, also provide atomic_signed_lock_free and atomic_unsigned_lock_free. is_always_lock_free is true for atomic_signed_lock_free and atomic_unsigned_lock_free. [ Note: An implementation which provides these type aliases should choose the integral specialization of atomic for which the atomic waiting and notifying operations are most efficient. - end note ]

Note: The reference to "atomic waiting and notifying operations" in the above change should refer to the new [atomics.wait] subclause.

Add a new subclause after [atomics.lockfree]:

30.� Waiting and notifying [atomics.wait]
Atomic waiting and notifying operations provide a mechanism to wait for the value of an atomic object to change more efficiently than can be achieved with polling.
The following functions are atomic waiting operations:
  • atomic<T>::wait.

  • atomic_flag::wait.

  • atomic_wait and atomic_wait_explicit.

  • atomic_flag_wait and atomic_flag_wait_explicit.

The following functions are atomic notifying operations:
  • atomic<T>::notify_one and atomic<T>::notify_all.

  • atomic_flag::notify_one and atomic_flag::notify_all.

  • atomic_notify_one and atomic_notify_all.

  • atomic_flag_notify_one and atomic_flag_notify_all.

Atomic waiting operations may block until they are unblocked by atomic notifying operations, according to each function’s effects. [ Note: Programs are not guaranteed to observe transient atomic values, an issue known as the A-B-A problem, resulting in continued blocking if a condition is only temporarily met. – end note ]

Modify [atomics.types.generic] as follows:

30.7 Class template atomic [atomics.types.generic]
namespace std {
  template<class T> struct atomic {
    using value_type = T;
    static constexpr bool is_always_lock_free = implementation-defined;
    bool is_lock_free() const volatile noexcept;
    bool is_lock_free() const noexcept;
    void store(T, memory_order = memory_order::seq_cst) volatile noexcept;
    void store(T, memory_order = memory_order::seq_cst) noexcept;
    T load(memory_order = memory_order::seq_cst) const volatile noexcept;
    T load(memory_order = memory_order::seq_cst) const noexcept;
    operator T() const volatile noexcept;
    operator T() const noexcept;
    T exchange(T, memory_order = memory_order::seq_cst) volatile noexcept;
    T exchange(T, memory_order = memory_order::seq_cst) noexcept;
    bool compare_exchange_weak(T&, T, memory_order, memory_order) volatile noexcept;
    bool compare_exchange_weak(T&, T, memory_order, memory_order) noexcept;
    bool compare_exchange_strong(T&, T, memory_order, memory_order) volatile noexcept;
    bool compare_exchange_strong(T&, T, memory_order, memory_order) noexcept;
    bool compare_exchange_weak(T&, T, memory_order = memory_order::seq_cst) volatile noexcept;
    bool compare_exchange_weak(T&, T, memory_order = memory_order::seq_cst) noexcept;
    bool compare_exchange_strong(T&, T, memory_order = memory_order::seq_cst) volatile noexcept;
    bool compare_exchange_strong(T&, T, memory_order = memory_order::seq_cst) noexcept;
    void wait(T, memory_order = memory_order::seq_cst) const volatile noexcept;
    void wait(T, memory_order = memory_order::seq_cst) const noexcept;
    void notify_one() volatile noexcept;
    void notify_one() noexcept;
    void notify_all() volatile noexcept;
    void notify_all() noexcept;
    atomic() noexcept = default;
    constexpr atomic(T) noexcept;
    atomic(const atomic&) = delete;
    atomic& operator=(const atomic&) = delete;
    atomic& operator=(const atomic&) volatile = delete;
    T operator=(T) volatile noexcept;
    T operator=(T) noexcept;
  };
}

Add the following to the end of [atomics.types.operations]:

void wait(T old, memory_order order = memory_order::seq_cst) const volatile noexcept;
void wait(T old, memory_order order = memory_order::seq_cst) const noexcept;
Expects: order is neither memory_order::release nor memory_order::acq_rel.
Effects: Repeatedly performs the following steps, in order:
  • Evaluates load(order) and compares its value representation for equality against that of old.

  • If they compare unequal, returns.

  • Blocks until it is unblocked by an atomic notifying operation or is unblocked spuriously.

Remarks: This function is an atomic waiting operation.
void notify_one() volatile noexcept;
void notify_one() noexcept;
Effects: Given the set W of atomic waiting operations such that:
  • each atomic waiting operation has blocked after observing the result of some atomic operation X,

  • X precedes some atomic operation Y in the modification order of *this, and

  • Y happens before this call.

If the set W is not empty, unblocks the execution of one operation in W.

Remarks: This function is an atomic notifying operation.
void notify_all() volatile noexcept;
void notify_all() noexcept;
Effects: Unblocks the execution of all atomic waiting operations such that:
  • each atomic waiting operation has blocked after observing the result of some atomic operation X,

  • X precedes some atomic operation Y in the modification order of *this, and

  • Y happens before this call.

Remarks: This function is an atomic notifying operation.

Modify [atomics.types.int] paragraph 1 as follows:

30.7.2 Specializations for integers [atomics.types.int]
There are specializations of the atomic class template for the integral types char, signed char, unsigned char, short, unsigned short, int, unsigned int, long, unsigned long, long long, unsigned long long, char8_t, char16_t, char32_t, wchar_t, and any other types needed by the typedefs in the header <cstdint>. For each such type integral, the specialization atomic<integral> provides additional atomic operations appropriate to integral types. [ Note: For the specialization atomic<bool>, see 30.7. — end note ]
namespace std {
  template<> struct atomic<integral> {
    using value_type = integral;
    using difference_type = value_type;
    static constexpr bool is_always_lock_free = implementation-defined;
    bool is_lock_free() const volatile noexcept;
    bool is_lock_free() const noexcept;
    void store(integral, memory_order = memory_order::seq_cst) volatile noexcept;
    void store(integral, memory_order = memory_order::seq_cst) noexcept;
    integral load(memory_order = memory_order::seq_cst) const volatile noexcept;
    integral load(memory_order = memory_order::seq_cst) const noexcept;
    operator integral() const volatile noexcept;
    operator integral() const noexcept;
    integral exchange(integral, memory_order = memory_order::seq_cst) volatile noexcept;
    integral exchange(integral, memory_order = memory_order::seq_cst) noexcept;
    bool compare_exchange_weak(integral&, integral,
                               memory_order, memory_order) volatile noexcept;
    bool compare_exchange_weak(integral&, integral,
                               memory_order, memory_order) noexcept;
    bool compare_exchange_strong(integral&, integral,
                                 memory_order, memory_order) volatile noexcept;
    bool compare_exchange_strong(integral&, integral,
                                 memory_order, memory_order) noexcept;
    bool compare_exchange_weak(integral&, integral,
                               memory_order = memory_order::seq_cst) volatile noexcept;
    bool compare_exchange_weak(integral&, integral,
                               memory_order = memory_order::seq_cst) noexcept;
    bool compare_exchange_strong(integral&, integral,
                                 memory_order = memory_order::seq_cst) volatile noexcept;
    bool compare_exchange_strong(integral&, integral,
                                 memory_order = memory_order::seq_cst) noexcept;
    void wait(integral, memory_order = memory_order::seq_cst) const volatile noexcept;
    void wait(integral, memory_order = memory_order::seq_cst) const noexcept;
    void notify_one() volatile noexcept;
    void notify_one() noexcept;
    void notify_all() volatile noexcept;
    void notify_all() noexcept;
    integral fetch_add(integral, memory_order = memory_order::seq_cst) volatile noexcept;
    integral fetch_add(integral, memory_order = memory_order::seq_cst) noexcept;
    integral fetch_sub(integral, memory_order = memory_order::seq_cst) volatile noexcept;
    integral fetch_sub(integral, memory_order = memory_order::seq_cst) noexcept;
    integral fetch_and(integral, memory_order = memory_order::seq_cst) volatile noexcept;
    integral fetch_and(integral, memory_order = memory_order::seq_cst) noexcept;
    integral fetch_or(integral, memory_order = memory_order::seq_cst) volatile noexcept;
    integral fetch_or(integral, memory_order = memory_order::seq_cst) noexcept;
    integral fetch_xor(integral, memory_order = memory_order::seq_cst) volatile noexcept;
    integral fetch_xor(integral, memory_order = memory_order::seq_cst) noexcept;

    atomic() noexcept = default;
    constexpr atomic(integral) noexcept;
    atomic(const atomic&) = delete;
    atomic& operator=(const atomic&) = delete;
    atomic& operator=(const atomic&) volatile = delete;
    integral operator=(integral) volatile noexcept;
    integral operator=(integral) noexcept;

    integral operator++(int) volatile noexcept;
    integral operator++(int) noexcept;
    integral operator--(int) volatile noexcept;
    integral operator--(int) noexcept;
    integral operator++() volatile noexcept;
    integral operator++() noexcept;
    integral operator--() volatile noexcept;
    integral operator--() noexcept;
    integral operator+=(integral) volatile noexcept;
    integral operator+=(integral) noexcept;
    integral operator-=(integral) volatile noexcept;
    integral operator-=(integral) noexcept;
    integral operator&=(integral) volatile noexcept;
    integral operator&=(integral) noexcept;
    integral operator|=(integral) volatile noexcept;
    integral operator|=(integral) noexcept;
    integral operator^=(integral) volatile noexcept;
    integral operator^=(integral) noexcept;
  };
}

Modify [atomics.types.float] paragraph 1 as follows:

30.7.3 Specializations for floating-point types [atomics.types.float]
There are specializations of the atomic class template for the floating-point types float, double, and long double. For each such type floating-point, the specialization atomic<floating-point> provides additional atomic operations appropriate to floating-point types.
namespace std {
  template<> struct atomic<floating-point> {
    using value_type = floating-point;
    using difference_type = value_type;
    static constexpr bool is_always_lock_free = implementation-defined;
    bool is_lock_free() const volatile noexcept;
    bool is_lock_free() const noexcept;
    void store(floating-point, memory_order = memory_order::seq_cst) volatile noexcept;
    void store(floating-point, memory_order = memory_order::seq_cst) noexcept;
    floating-point load(memory_order = memory_order::seq_cst) const volatile noexcept;
    floating-point load(memory_order = memory_order::seq_cst) const noexcept;
    operator floating-point() const volatile noexcept;
    operator floating-point() const noexcept;
    floating-point exchange(floating-point,
                             memory_order = memory_order::seq_cst) volatile noexcept;
    floating-point exchange(floating-point,
                             memory_order = memory_order::seq_cst) noexcept;
    bool compare_exchange_weak(floating-point&, floating-point,
                               memory_order, memory_order) volatile noexcept;
    bool compare_exchange_weak(floating-point&, floating-point,
                               memory_order, memory_order) noexcept;
    bool compare_exchange_strong(floating-point&, floating-point,
                                 memory_order, memory_order) volatile noexcept;
    bool compare_exchange_strong(floating-point&, floating-point,
                                 memory_order, memory_order) noexcept;
    bool compare_exchange_weak(floating-point&, floating-point,
                               memory_order = memory_order::seq_cst) volatile noexcept;
    bool compare_exchange_weak(floating-point&, floating-point,
                               memory_order = memory_order::seq_cst) noexcept;
    bool compare_exchange_strong(floating-point&, floating-point,
                                 memory_order = memory_order::seq_cst) volatile noexcept;
    bool compare_exchange_strong(floating-point&, floating-point,
                                 memory_order = memory_order::seq_cst) noexcept;
    void wait(floating-point, memory_order = memory_order::seq_cst) const volatile noexcept;
    void wait(floating-point, memory_order = memory_order::seq_cst) const noexcept;
    void notify_one() volatile noexcept;
    void notify_one() noexcept;
    void notify_all() volatile noexcept;
    void notify_all() noexcept;
 
    floating-point fetch_add(floating-point,
                                    memory_order = memory_order::seq_cst) volatile noexcept;
    floating-point fetch_add(floating-point,
                                    memory_order = memory_order::seq_cst) noexcept;
    floating-point fetch_sub(floating-point,
                                    memory_order = memory_order::seq_cst) volatile noexcept;
    floating-point fetch_sub(floating-point,
                                    memory_order = memory_order::seq_cst) noexcept;

    atomic() noexcept = default;
    constexpr atomic(floating-point) noexcept;
    atomic(const atomic&) = delete;
    atomic& operator=(const atomic&) = delete;
    atomic& operator=(const atomic&) volatile = delete;
    floating-point operator=(floating-point) volatile noexcept;
    floating-point operator=(floating-point) noexcept;

    floating-point operator+=(floating-point) volatile noexcept;
    floating-point operator+=(floating-point) noexcept;
    floating-point operator-=(floating-point) volatile noexcept;
    floating-point operator-=(floating-point) noexcept;
  };
}

Modify [atomics.types.pointer] paragraph 1 as follows:

30.7.4 Partial specialization for pointers [atomics.types.pointer]
namespace std {
  template<class T> struct atomic<T*> {
    using value_type = T*;
    using difference_type = ptrdiff_t;
    static constexpr bool is_always_lock_free = implementation-defined;
    bool is_lock_free() const volatile noexcept;
    bool is_lock_free() const noexcept;
    void store(T*, memory_order = memory_order::seq_cst) volatile noexcept;
    void store(T*, memory_order = memory_order::seq_cst) noexcept;
    T* load(memory_order = memory_order::seq_cst) const volatile noexcept;
    T* load(memory_order = memory_order::seq_cst) const noexcept;
    operator T*() const volatile noexcept;
    operator T*() const noexcept;
    T* exchange(T*, memory_order = memory_order::seq_cst) volatile noexcept;
    T* exchange(T*, memory_order = memory_order::seq_cst) noexcept;
    bool compare_exchange_weak(T*&, T*, memory_order, memory_order) volatile noexcept;
    bool compare_exchange_weak(T*&, T*, memory_order, memory_order) noexcept;
    bool compare_exchange_strong(T*&, T*, memory_order, memory_order) noexcept;
    bool compare_exchange_weak(T*&, T*,
                               memory_order = memory_order::seq_cst) volatile noexcept;
    bool compare_exchange_weak(T*&, T*,
                               memory_order = memory_order::seq_cst) noexcept;
    bool compare_exchange_strong(T*&, T*,
                                 memory_order = memory_order::seq_cst) volatile noexcept;
    bool compare_exchange_strong(T*&, T*,
                                 memory_order = memory_order::seq_cst) noexcept;
    void wait(T*, memory_order = memory_order::seq_cst) const volatile noexcept;
    void wait(T*, memory_order = memory_order::seq_cst) const noexcept;
    void notify_one() volatile noexcept;
    void notify_one() noexcept;
    void notify_all() volatile noexcept;
    void notify_all() noexcept;
    T* fetch_add(ptrdiff_t, memory_order = memory_order::seq_cst) volatile noexcept;
    T* fetch_add(ptrdiff_t, memory_order = memory_order::seq_cst) noexcept;
    T* fetch_sub(ptrdiff_t, memory_order = memory_order::seq_cst) volatile noexcept;
    T* fetch_sub(ptrdiff_t, memory_order = memory_order::seq_cst) noexcept;

    atomic() noexcept = default;
    constexpr atomic(T*) noexcept;
    atomic(const atomic&) = delete;
    atomic& operator=(const atomic&) = delete;
    atomic& operator=(const atomic&) volatile = delete;
    T* operator=(T*) volatile noexcept;
    T* operator=(T*) noexcept;

    T* operator++(int) volatile noexcept;
    T* operator++(int) noexcept;
    T* operator--(int) volatile noexcept;
    T* operator--(int) noexcept;
    T* operator++() volatile noexcept;
    T* operator++() noexcept;
    T* operator--() volatile noexcept;
    T* operator--() noexcept;
    T* operator+=(ptrdiff_t) volatile noexcept;
    T* operator+=(ptrdiff_t) noexcept;
    T* operator-=(ptrdiff_t) volatile noexcept;
    T* operator-=(ptrdiff_t) noexcept;
  };
}
There is a partial specialization of the atomic class template for pointers. Specializations of this partial specialization are standard-layout structs. They each have a trivial default constructor and a trivial destructor.

Modify [atomics.flag] as follows:

30.9 Flag type and operations [atomics.flag]
namespace std {
  struct atomic_flag {
    bool test(memory_order = memory_order::seq_cst) const volatile noexcept;
    bool test(memory_order = memory_order::seq_cst) const noexcept;
    bool test_and_set(memory_order = memory_order::seq_cst) volatile noexcept;
    bool test_and_set(memory_order = memory_order::seq_cst) noexcept;
    void clear(memory_order = memory_order::seq_cst) volatile noexcept;
    void clear(memory_order = memory_order::seq_cst) noexcept;
    void wait(bool, memory_order = memory_order::seq_cst) const volatile noexcept;
    void wait(bool, memory_order = memory_order::seq_cst) const noexcept;
    void notify_one() volatile noexcept;
    void notify_one() noexcept;
    void notify_all() volatile noexcept;
    void notify_all() noexcept;
 
    atomic_flag() noexcept = default;
    atomic_flag(const atomic_flag&) = delete;
    atomic_flag& operator=(const atomic_flag&) = delete;
    atomic_flag& operator=(const atomic_flag&) volatile = delete;
  };
 
  bool atomic_flag_test(const volatile atomic_flag*) noexcept;
  bool atomic_flag_test(const atomic_flag*) noexcept;
  bool atomic_flag_test_explicit(const volatile atomic_flag*, memory_order) noexcept;
  bool atomic_flag_test_explicit(const atomic_flag*, memory_order) noexcept;
  bool atomic_flag_test_and_set(volatile atomic_flag*) noexcept;
  bool atomic_flag_test_and_set(atomic_flag*) noexcept;
  bool atomic_flag_test_and_set_explicit(volatile atomic_flag*, memory_order) noexcept;
  bool atomic_flag_test_and_set_explicit(atomic_flag*, memory_order) noexcept;
  void atomic_flag_clear(volatile atomic_flag*) noexcept;
  void atomic_flag_clear(atomic_flag*) noexcept;
  void atomic_flag_clear_explicit(volatile atomic_flag*, memory_order) noexcept;
  void atomic_flag_clear_explicit(atomic_flag*, memory_order) noexcept;
  void atomic_flag_wait(const volatile atomic_flag*, bool) noexcept;
  void atomic_flag_wait(const atomic_flag*, bool) noexcept;
  void atomic_flag_wait_explicit(const volatile atomic_flag*, bool, memory_order) noexcept;
  void atomic_flag_wait_explicit(const atomic_flag*, bool, memory_order) noexcept;
  void atomic_flag_notify_one(volatile atomic_flag*) noexcept;
  void atomic_flag_notify_one(atomic_flag*) noexcept;
  void atomic_flag_notify_all(volatile atomic_flag*) const noexcept;
  void atomic_flag_notify_all(atomic_flag*) const noexcept;
 
  #define ATOMIC_FLAG_INIT see below
}
The atomic_flag type provides the classic test-and-set functionality. It has two states, set and clear.
Operations on an object of type atomic_flag shall be lock-free. [ Note: Hence the operations should also be address-free. — end note ]
The atomic_flag type is a standard-layout struct. It has a trivial default constructor and a trivial destructor.
The macro ATOMIC_FLAG_INIT shall be defined in such a way that it can be used to initialize an object of type atomic_flag to the clear state. The macro can be used in the form:
atomic_flag guard = ATOMIC_FLAG_INIT;

It is unspecified whether the macro can be used in other initialization contexts. For a complete static-duration object, that initialization shall be static. Unless initialized with ATOMIC_FLAG_INIT, it is unspecified whether an atomic_flag object has an initial state of set or clear.

bool atomic_flag_test(const volatile atomic_flag* object) noexcept;
bool atomic_flag_test(const atomic_flag* object) noexcept;
bool atomic_flag_test_explicit(const volatile atomic_flag* object, memory_order order) noexcept;
bool atomic_flag_test_explicit(const atomic_flag* object, memory_order order) noexcept;
bool atomic_flag::test(memory_order order = memory_order::seq_cst) const volatile noexcept;
bool atomic_flag::test(memory_order order = memory_order::seq_cst) const noexcept;
Expects: order is neither memory_order::release nor memory_order::acq_rel.
Effects: Memory is affected according to the value of order, or according to memory_order::seq_cst for atomic_flag_test.
Returns: Atomically returns the value pointed to by object or this.
bool atomic_flag_test_and_set(volatile atomic_flag* object) noexcept;
bool atomic_flag_test_and_set(atomic_flag* object) noexcept;
bool atomic_flag_test_and_set_explicit(volatile atomic_flag* object,
                                       memory_order order) noexcept;
bool atomic_flag_test_and_set_explicit(atomic_flag* object, memory_order order) noexcept;
bool atomic_flag::test_and_set(memory_order order = memory_order::seq_cst) volatile noexcept;
bool atomic_flag::test_and_set(memory_order order = memory_order::seq_cst) noexcept;
Effects: Atomically sets the value pointed to by object or by this to true. Memory is affected according to the value of order. These operations are atomic read-modify-write operations (4.7).
Returns: Atomically, the value of the object immediately before the effects.
void atomic_flag_clear(volatile atomic_flag* object) noexcept;
void atomic_flag_clear(atomic_flag* object) noexcept;
void atomic_flag_clear_explicit(volatile atomic_flag* object,
                                memory_order order) noexcept;
void atomic_flag_clear_explicit(atomic_flag* object, memory_order order) noexcept;
void atomic_flag::clear(memory_order order = memory_order::seq_cst) volatile noexcept;
void atomic_flag::clear(memory_order order = memory_order::seq_cst) noexcept;

Expects: order is neither memory_order::consume, memory_order::acquire, nor memory_order::acq_rel.

Effects: Atomically sets the value pointed to by object or by this to false. Memory is affected according to the value of order.

void atomic_flag_wait(const volatile atomic_flag* object, bool old) noexcept;
void atomic_flag_wait(const atomic_flag* object, bool old) noexcept;
void atomic_flag_wait_explicit(const volatile atomic_flag* object,
                               bool old, memory_order order) noexcept;
void atomic_flag_wait_explicit(const atomic_flag* object,
                               bool old, memory_order order) noexcept;
void atomic_flag::wait(bool old,
                       memory_order order = memory_order::seq_cst) const volatile noexcept;
void atomic_flag::wait(bool old,
                       memory_order order = memory_order::seq_cst) const noexcept;
Expects: order is neither memory_order::release nor memory_order::acq_rel.
Effects: Let af be object for the non-member functions and this for the member functions. Let mo be memory_order::seq_cst for atomic_flag_wait and the value of order for the other functions. Repeatedly performs the following steps, in order:
  • Evaluates af->load(mo) != old.

  • If the result of that evaluation is true, returns.

  • Blocks until it is unblocked by an atomic notifying operation or is unblocked spuriously.

Remarks: This function is an atomic waiting operation.
void atomic_flag_notify_one(volatile atomic_flag* object) noexcept;
void atomic_flag_notify_one(atomic_flag* object) noexcept;
void atomic_flag::notify_one() volatile noexcept;
void atomic_flag::notify_one() noexcept;
Effects: Given the set W of atomic waiting operations such that:
  • the atomic waiting operation blocked after observing the result of some atomic operation X,

  • X precedes some atomic operation Y in the modification order of *object or *this, and

  • Y happens before this call.

If the set W is not empty, unblocks the execution of one operation in set W.

Remarks: This function is an atomic notifying operation.
void atomic_flag_notify_all(volatile atomic_flag* object) const noexcept;
void atomic_flag_notify_all(atomic_flag* object) const noexcept;
void atomic_flag::notify_all() volatile noexcept;
void atomic_flag::notify_all() noexcept;
Effects: Unblocks the execution of all atomic waiting operations such that:
  • the atomic waiting operation blocked after observing the result of some atomic operation X,

  • X precedes some atomic operation Y in the modification order of *object or *this, and

  • Y happens before this call.

Remarks: This function is an atomic notifying operation.

Modify Table 134 "Thread support library summary" in [thread.general] as follows:

Table 134 — Thread support library summary
Subclause Header(s)
31.2 Requirements
31.3 Threads <thread>
31.4 Mutual exclusion <mutex> <shared_mutex>
31.5 Condition variables <condition_variable>
31.� Semaphores <semaphore>
31.� Latches and barriers <latch> <barrier>
31.6 Futures <future>

Add two new subclauses after [thread.condition]:

31.� Semaphores [thread.semaphore]
Semaphores are lightweight synchronization primitives used to constrain concurrent access to a shared resource. They are widely used to implement other synchronization primitives and, whenever both are applicable, can be more efficient than condition variables.
A counting semaphore is a semaphore object that models a non-negative resource count. A binary semaphore is a semaphore object that has only two states known as available and unavailable. [ Note: A binary semaphore should be more efficient than a counting semaphore with a unit magnitude count. – end note ]
31.�.1 Header <semaphore> synopsis [thread.semaphore.syn]
namespace std {  
  template<ptrdiff_t least_max_value = implementation-defined>
    class counting_semaphore;

  using binary_semaphore = counting_semaphore<1>;
}
31.�.2 Class template counting_semaphore [thread.semaphore.counting.class]
namespace std {
  template<ptrdiff_t least_max_value>
  class counting_semaphore {
  public:
    static constexpr ptrdiff_t max() noexcept;

    constexpr explicit counting_semaphore(ptrdiff_t desired);
    ~counting_semaphore();

    counting_semaphore(const counting_semaphore&) = delete;
    counting_semaphore& operator=(const counting_semaphore&) = delete;

    void release(ptrdiff_t update = 1);
    void acquire();
    bool try_acquire() noexcept;
    template<class Rep, class Period>
      bool try_acquire_for(const chrono::duration<Rep, Period>& rel_time);
    template<class Clock, class Duration>
      bool try_acquire_until(const chrono::time_point<Clock, Duration>& abs_time);

  private:
    ptrdiff_t counter; // exposition only
  };
}
Class counting_semaphore maintains an internal counter that is initialized when the semaphore is created. The counter is decremented when a thread acquires the semaphore, and is incremented when a thread releases the semaphore. If a thread tries to acquire the semaphore when the counter is zero, the thread will block until another thread increments the counter by releasing the semaphore.
least_max_value shall be greater than zero.
counting_semaphores permit concurrent invocation of the release, acquire, try_acquire, try_acquire_for, and try_acquire_until member functions.
static constexpr ptrdiff_t max() noexcept;
Returns: The maximum value of counter. This value is greater than or equal to least_max_value.
constexpr explicit counting_semaphore(ptrdiff_t desired);
Expects: desired is greater than or equal to zero and less than or equal to max().
Effects: Initializes counter with desired.
Throws: Nothing.
~counting_semaphore();
Expects: For every function call blocked on *this, a function call that will cause it to unblock and return has happened before this call. [ Note: This relaxes the usual rules, which would have required all blocking function calls to happen before destruction. — end note ]
void release(ptrdiff_t update = 1);
Expects: update is greater than or equal to zero, and counter + update is less than or equal to max().
Effects: Atomically execute counter += update. Then, unblock any threads that are waiting for counter to be greater than zero.
Synchronization: Strongly happens before invocations of try_acquire that observe the result of the effects.
Throws: system_error when an exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
bool try_acquire() noexcept;
Effects:
  • With low probability, returns immediately. [ Note: An implementation should ensure that try_acquire does not consistently return false in the absence of contending acquisitions. — end note ]

  • Otherwise, if counter is greater than zero, atomically decrement counter by one.

Returns: true if counter was decremented, otherwise false.
void acquire();
Effects: Repeatedly performs the following steps, in order:
  • Evaluates try_acquire. If the result is true, returns.

  • Blocks on *this until counter is greater than zero.

Throws: system_error when an exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
template<class Rep, class Period>
  bool try_acquire_for(const chrono::duration<Rep, Period>& rel_time);
template<class Clock, class Duration>
  bool try_acquire_until(const chrono::time_point<Clock, Duration>& abs_time);
Effects: Repeatedly performs the following steps, in order:
  • Evaluates try_acquire. If the result is true, returns true.

  • Blocks on *this until counter is greater than zero or until the timeout expires. If it is unblocked by the timeout expiring, returns false.

The timeout expires when the current time is after abs_time (for try_acquire_until) or when at least rel_time has passed from the start of the function (for try_acquire_for).

Throws: Timeout-related exceptions (31.2.4), or system_error when a non-timeout-related exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
31.� Coordination Types [thread.coord]
This subclause describes various concepts related to thread coordination, and defines the coordination types latch and barrier. These types facilitate concurrent computation performed by a number of threads. Concurrent invocations of the member functions of latch and barrier, other than their destructors, do not introduce data races.
31.�.1 Latches [thread.coord.latch]
A latch is a thread coordination mechanism that allows any number of threads to block until the latch is arrived at (via the count_down function) an expected number of times. The expected count is set when the latch is created. An individual latch is a single-use object; once the expected count has been reached, the latch cannot be reused.
31.�.1.1 Header <latch> synopsis [thread.coord.latch.syn]
namespace std {
  class latch;
}
31.�.1.2 Class latch [thread.coord.latch.class]
namespace std {
  class latch {
  public:
    constexpr explicit latch(ptrdiff_t expected);
    ~latch();

    latch(const latch&) = delete;
    latch& operator=(const latch&) = delete;
    
    void count_down(ptrdiff_t update = 1);
    bool try_wait() const noexcept;
    void wait() const;
    void arrive_and_wait(ptrdiff_t update = 1);

  private:
    ptrdiff_t counter; // exposition only
  };
} 
A latch maintains an internal counter that is initialized when the latch is created. Threads can block on the latch object, waiting for counter to be decremented to zero.
constexpr explicit latch(ptrdiff_t expected);
Expects: expected is greater than or equal to zero.
Effects: Initializes counter with expected.
Throws: Nothing.
~latch();
Expects: No threads are blocked on *this. [ Note: May be called even if some threads have not yet returned from invocations of wait on this object, provided that they are unblocked. This relaxes the usual rules, which would have required all blocking function calls to happen before destruction. - end note ]
Remarks: The destructor may block until all threads have exited invocations of wait on this object.
void count_down(ptrdiff_t update = 1);
Expects: update is greater than or equal to zero, and update is less than or equal to counter.
Effects: Atomically decrements counter by update. If counter is equal to zero, unblocks all threads blocked on *this.
Synchronization: Synchronizes with the returns from all calls that are unblocked.
Throws: system_error when an exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
bool try_wait() const noexcept;
Returns: counter == 0.
void wait() const;
Effects: If counter equals zero, returns immediately. Otherwise, blocks on *this until it is unblocked by a call to count_down that decrements counter to zero.
Throws: system_error when an exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
void arrive_and_wait(ptrdiff_t update = 1);
Effects: Equivalent to:
  • count_down(update);

  • wait();

Throws: system_error when an exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
31.�.2 Barriers [thread.coord.barrier]
A barrier is a thread coordination mechanism whose lifetime consists of a sequence of phases, where each phase allows a certain number of threads to arrive at the barrier and then wait for all the other threads to also arrive at the barrier. [ Note: A barrier is useful for managing repeated tasks that are handled by multiple threads. - end note ]
31.�.2.1 Header <barrier> synopsis [thread.coord.barrier.syn]
namespace std {
  template<class CompletionFunction = unspecified>
    class barrier;
}
31.�.2.2 Class template barrier [thread.coord.barrier.class]
namespace std {
  template<class CompletionFunction>
  class barrier {
  public:
    using arrival_token = see below;

    constexpr explicit barrier(ptrdiff_t expected,
                               CompletionFunction f = {});

    ~barrier();

    barrier(const barrier&) = delete;
    barrier& operator=(const barrier&) = delete;

    [[nodiscard]] arrival_token arrive(ptrdiff_t update = 1);
    void wait(arrival_token&& arrival) const;

    void arrive_and_wait();
    void arrive_and_drop();

  private:
    CompletionFunction completion; // exposition only
  };
}
Each phase of the barrier consists of the following steps:
  • The expected count is reset to what was specified by the expected argument to the constructor, possibly adjusted by calls to arrive_and_drop.

  • The expected count is decremented by each call to arrive.

  • When the expected count reaches zero, the completion step is run on one of the threads that arrived at the barrier during the phase.

  • When the completion step finishes, the next phase starts.

Each phase defines a synchronization point. Threads that arrive at the barrier during the phase can block on the phase’s synchronization point by calling wait, and will remain blocked until the phase completes.
The completion step that is executed at the end of each phase has the following effects:
  • Invokes the completion function, equivalent to completion().

  • Unblocks all threads that are blocked on the phase’s synchronization point.

The end of the completion step strongly happens before the returns from all calls that were unblocked by the completion step.

CompletionFunction shall meet the Cpp17MoveConstructible (Table 26) requirements and Cpp17Destructable (Table 30) requirements. is_invocable_r_v<void, CompletionFunction> shall be true, and noexcept(declval<CompletionFunction>()()) shall be true.
barrier::arrival_token is an unspecified type, such that is_nothrow_move_constructible_v<barrier::arrival_token> is true and is_nothrow_move_assignable_v<barrier::arrival_token> is true.
constexpr explicit barrier(ptrdiff_t expected,
                           CompletionFunction f = {});
Expects: expected is greater than or equal to zero.
Effects: Sets the initial expected count for each phase to expected. Initializes completion with std::move(f). Starts the first phase. [ Note: If expected is 0 this object can only be destroyed. — end note ]
Throws: Any exception thrown by CompletionFunction's move constructor.
~barrier();
Expects: No threads are blocked at a synchronization point for any phase of this object. [ Note: May be called even if some threads have not yet returned from invocations of wait, provided that they have unblocked. This relaxes the usual rules, which would have required all blocking function calls to happen before destruction. - end note ]
Remarks: The destructor may block until all threads have exited invocations of wait on this object.
[[nodiscard]] arrival_token arrive(ptrdiff_t update = 1);
Expected: update is greater than zero, and update is less than or equal to the expected count.
Effects: Constructs an object of type arrival_token that is associated with the barrier's synchronization point for the current phase. Then, decrements the expected count by update.
Synchronization: The call to arrive strongly happens before the start of the completion step for the current phase.
Returns: The constructed arrival_token object.
Throws: system_error when an exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
Remarks: This call can cause the completion step for the current phase to start.
void wait(arrival_token&& arrival) const;
Expects: arrival is associated with the synchronization point for the current or the immediately preceding phase of the same barrier object.
Effects: Blocks at the synchronization point associated with std::move(arrival) until the completion step of the synchronization point’s phase is run. [ Note: If arrival is associated with the synchronization point for a previous phase, the call returns immediately. - end note ]
Throws: system_error when an exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
void arrive_and_wait();
Expects: The expected count for the current phase is greater than zero.
Effects: Equivalent to wait(arrive()).
Throws: system_error when an exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
Remarks: This call can cause the completion step for the current phase to start.
void arrive_and_drop();
Expects: The expected count for the current phase is greater than zero.
Effects: Decrements the initial expected count for all subsequent phases by one. Then decrements the expected count for the current phase by one.
Synchronization: The call to arrive_and_drop strongly happens before the start of the completion step for the current phase.
Throws: system_error when an exception is required (31.2.2).
Error conditions: Any of the error conditions allowed for mutex types (31.4.3.2).
Remarks: This call can cause the completion step for the current phase to start.

Create the following feature test macros with the given headers, adding them to the table in [support.limits.general]:

Index

Terms defined by this specification

References

Informative References

[N4791]
Richard Smith. Working Draft, Standard for Programming Language C++. 26 November 2018. URL: https://wg21.link/n4791
[P0514R4]
Olivier Giroux. Efficient concurrent waiting for C++20. 3 May 2018. URL: https://wg21.link/p0514r4
[P0666R2]
Olivier Giroux. Revised Latches and Barriers for C++20. 6 May 2018. URL: https://wg21.link/p0666r2
[P0995R1]
JF Bastien, Olivier Giroux, Andrew Hunter. Improving atomic_flag. 22 June 2018. URL: https://wg21.link/p0995r1
[P1258R0]
Detlef Vollmann. Don't Make C++ Unimplementable On Small CPUs. 8 October 2018. URL: https://wg21.link/p1258r0