Jump to Table of Contents Collapse Sidebar

P2013R3
Freestanding Language: Optional ::operator new

Published Proposal,

This version:
https://wg21.link/P2013R3
Author:
(NI)
Audience:
EWG
Project:
ISO/IEC JTC1/SC22/WG21 14882: Programming Language — C++
Source:
github.com/ben-craig/freestanding_proposal/blob/master/core/new_delete.bs

Abstract

In freestanding implementations, standardize existing practices and make the default allocating ::operator news optional.

1. Revision History

1.1. R3

Added EWG Aug 2020 telecon polling results.

In the design, an ODR-use without a definition no longer requires ill-formedness. The intent is still the same, in that it typically results in a linker error.

Updated grammar and ill-formedness of wording.

Found an additional note in expr.new/10 that needed adjustment.

Deferred feature test macro decision to a future revision of P2198.

1.2. R2

Making the status of "placement" new more obvious ("placement" new is still required).

Added words in the design to indicate that the declarations in <new> are not changing.

Mentioning that pointer safety remains unchanged.

1.3. R1

Added polling results from Prague EWGI and EWG.

Added discussion on feature test macro.

Added discussion on not fixing virtual destructors.

Declaring that constexpr new must continue to work.

Added wording.

Wording includes changes to library clauses, so added LEWG to the audience.

1.4. R0

R0 of this paper was extracted from [P1105R1].

The proposed solution is different than the one proposed for P1105R1, but the motivation is the same. The solution from P1105R1 is still listed as a design alternative.

2. What is changing

On freestanding systems without default heap storage, the presence of the replaceable allocation functions (i.e. allocating ::operator new, including the nothrow_t and align_val_t overloads, single and array forms) will be implementation defined. Implementations shall provide all the replaceable allocation functions, or none of them. If none of the replaceable allocation functions are provided, then an ODR-use of the functions will typically manifest as a linker error.

As a consequence of the above, coroutines that are relying on the global allocation functions will be ill-formed so long as those global allocation functions are not present.

No other core language features require ::operator new. basic.stc.dynamic.allocation

::operator delete will be implementable as a no-op function on implementations that do not provide a default ::operator new.

3. What is staying the same

The replaceable deallocating ::operator delete functions are still required to be present. virtual destructors ODR-use their associated operator delete(basic.def.odr), so keeping the global ::operator delete allows those virtual destructors to continue building. Alternatives to this choice are discussed in § 7 Design Alternatives.

Calling ::operator delete on a non-null pointer that did not come from ::operator new is still undefined behavior new.delete.single new.delete.array. Calling delete on an object or base that didn’t come from new is still undefined behavior expr.delete. This is what makes a no-op ::operator delete a valid strategy on implementations without a global ::operator new.

The replaceable allocation functions will still be implicitly declared at global scope in each translation unit basic.stc.dynamic. Non-ODR-uses of the replaceable allocation functions are still permitted (e.g. inside of uninstantiated templates). The declarations of ::operator new in the <new> header are still required to be present. Implementations of the replaceable allocation functions can be performed by linking in an extra translation-unit with the definitions of the functions. Since this replacement typically happens at link time, ODR-uses of missing replaceable allocation functions usually won’t be diagnosable at compile time.

"constexpr new" is still required to work, even when the replaceable allocation functions are not present. This requires some tweaking of standardese.

Non-allocating placement ::operator new (colloquially "placement new") and ::operator delete (colloquially "placement delete") are still required to be present in freestanding implementations.

Core language concepts of pointer safety remain unchanged. Note that the pointer safety library facilities util.dynamic.safety are not required to be present in freestanding implementations, and the author is not aware of any papers to make the pointer safety library facilities required in freestanding implementations.

Hosted implementations are unchanged. Users of freestanding implementations can still provide implementations of the replaceable allocation and deallocation functions. The behavior of virtual destructors is unchanged. The behavior of class specific operator new and operator delete overloads is unchanged. The requirements on user-provided ::operator new and ::operator delete overloads remains the same, particularly those requirements involving error behaviors. Coroutines will behave the same so long as promise-specific allocators are used. The storage for exception objects will remain unspecified.

4. Why?

4.1. No allocations allowed

In space constrained and/or real-time environments, there is often no free store. These environments often cannot tolerate the space overhead for the free store, or the non-determinism from using the free store. In these environments, it is a desirable property for accidental global new usage to cause a build failure. With this proposal, users could expect a linker error when global new is used inappropriately.

FreeRTOS allows for both static and dynamic allocation of OS constructs [FreeRTOS_StaticVDynamic]. Static allocation in conjunction with a missing ::operator new can help avoid overhead and eliminate accidental usage.

THREADX [THREADX] does not consider dynamic allocation a core service, and can be built without support for dynamic allocation in order to reduce application size. THREADX also distinguishes between byte allocation (general purpose) vs. block allocation (no-fragmentation elements of fixed size in a pool).

Also, by allowing a no-op ::operator delete implementation, these space constrained applications can save code-size. No code needs to be present for ::operator delete synchronization, free block coalescing, or free block searching.

4.2. No right way to allocate memory

In some target environments, there is no "right" way to allocate memory. In kernel and embedded domains, the implementer of the C++ toolchain doesn’t always know the "right" way to allocate memory on the target environment. This makes it difficult to provide an implementation for ::operator new. The implementer cannot even rely on the presence of malloc, as it runs into the same fundamental problems.

As an example, in the Microsoft Windows kernel environment, there are two leading choices about where to get dynamic memory [MSPools]. Users can get memory from the non-paged pool, which is a safe, but scarce resource; or users can get memory from the paged pool, which is plentiful, but not accessible in many common kernel operations. Non-paged pool must be used any time the allocated memory needs to be accessible from an interrupt or from a "high IRQL" context. The author has had experience with both paged pool and non-paged pool as defaults, with the predictable outcome of crashes with paged pool defaults and OOM with non-paged pool defaults. The implementer of the C++ toolchain is not in a good position to make this choice for the user.

In the Linux kernel environment, kmalloc [kmalloc] with the GFP_KERNEL should be used when allocating memory within the context of a process and outside of a lock, but GFP_ATOMIC should be used when allocating memory outside the context of a process, such as inside of an interrupt. The implementers of the C++ runtime are in no position to know which is the correct flag to use by default. Using GFP_KERNEL when GFP_ATOMIC is needed will result in crashes from interrupt code and deadlocks. Using GFP_ATOMIC when GFP_KERNEL is appropriate will result in reduced system performance, spurious OOM errors, and premature exhaustion of emergency memory pools.

Freestanding implementations are intended to run without the benefit of an operating system (basic.def.odr). However, the name of the function that supplies dynamic memory is usually an OS-specific detail. The C++ implementation should not (and may not) know the name of the function to request memory. The Windows kernel uses ExAllocatePoolWithTag. In the Linux kernel, kmalloc is the main function to use. In FreeBSD, a function named malloc is present, but it takes different arguments than the C standard library function of the same name. FreeRTOS uses pvPortMalloc, and THREADX uses tx_byte_allocate. Home-grown OSes will likely have other spellings for memory allocation routines.

Today’s C++ implementations don’t provide ::operator new implementations for all possible targets. Doing so isn’t a plausible goal, especially when the home-grown OSes are taken into account. This means that users are already forced into choosing between not having ::operator new support and providing their own implementation. We should acknowledge and standardize this existing practice, especially since we already have the extension point mechanism in place.

4.3. What about allocators?

The C++20 freestanding library does not include allocators. [P1642R1] proposes adding allocator machinery to freestanding, but doesn’t add std::allocator itself. In addition, none of the allocating standard containers are in C++20’s freestanding library or any current freestanding library proposal that the author is aware of. From a minimalist freestanding perspective, allocators aren’t a solution.

Allocators are still useful in a less-than-minimal freestanding implementation. In environments with dynamic memory, custom allocators can be written and used with standard containers, assuming that the containers are present in the implementation. This could be done even if a global ::operator new is not present. The author has used stlport::vector<int, PagedLockedAllocator> successfully in these environments.

std::allocator is implemented in terms of global ::operator new. In practice, it would be easy for an implementation to have an implementation of std::allocator in a header / module, and have that header still compile just fine, as it wouldn’t ODR-use ::operator new until it was instantiated. If the user has provided a global ::operator new, then std::allocator would have the same semantics as mandated by the standard. If the global ::operator new is not present, then uses of std::allocator would fail to link, which would still be conforming behavior on a freestanding implementation.

Some facilities in the standard library (e.g. make_unique) are implemented in terms of new, and not an allocator interface. It is useful to make these facilities error when dynamic memory isn’t available, and it is also useful to be able to control which memory pool is used by default.

4.4. virtual destructors

A no-op ::operator delete is still provided in order to satisfy virtual destructors. virtual destructors ODR-use their associated operator delete(basic.def.odr). This approach has the disadvantage that there is a small, one-time overhead for the first virtual destructor in a program, even if there are no usages of new or delete. The overhead is small though, and you only pay for the overhead if you use virtual destructors.

Ideally, if neither new nor delete is ever called, we wouldn’t need an operator delete. This proposal still requires some operator delete to exist, though that operator delete can be a no-op.

4.5. Why not fix virtual destructors, instead of keeping a no-op operator delete?

This paper attempts to standardize existing practice. There is not any existing practice for "fixed" virtual destructors. Note that this paper isn’t changing any requirements on operator delete or virtual destructors. It will be no more difficult to fix it in the future than it would be today. A motivated author could attempt to fix the problem in a future paper.

4.6. Feature test macro

A future revision of P2198 will discuss this in more depth, and provide a recommendation.

In order to provide this macro, library implementations are going to require knowledge of the target environment. That knowledge may be via a list of known target platforms that are detected at build time, or by having the builder of the implementation supply that information in a configuration flag.

The most likely usage of a feature test macro for this feature is to conditionally define a custom ::operator new iff the implementation did not provide one by default. This is dangerous territory, as it encourages libraries to provide the one-and-only ::operator new definition. If two such libraries do this, then there is an ODR issue.

Another likely usage is to fall back to an implementation that does not use the heap at all.

#if defined(__cpp_lib_no_default_operator_new) && __cpp_lib_no_default_operator_new >= 20200913
  using my_container = fixed_capacity_vector;
#else
  using my_container = my_vector;
#endif

This is an imprecise check. Even though there is no default operator new, there may be a user provided operator new that works fine.

If this feature test macro were provided in the positive (__cpp_lib_has_default_operator_new), it wouldn’t be useful for a very long time.

#if defined(__cpp_lib_has_default_operator_new) && __cpp_lib_has_default_operator_new >= 20200913
  using my_container = my_vector;
#else
  // spuriously triggers for C++20 and earlier code
  using my_container = fixed_capacity_vector;
#endif

If this feature test macro were provided in the negative (__cpp_lib_no_default_operator_new), it would be the only feature test macro that wouldn’t be required to be defined in a conforming implementation.

All these considerations are deserving of dedicated SG10 discussion with P2198, and should not hold up the progress of this paper.

4.7. Likely misuses and abuses

Users are likely to provide overloads of ::operator new that do not follow the requirements set forth in new.delete, particularly the requirements around throwing bad_alloc. Ignoring this requirement will still result in undefined behavior, just as it does in C++20. Some compilers optimize assuming that the throwing forms of new will never return a null pointer [throwing_new]. A likely outcome of the undefined behavior is unexpectedly eliding null checks in the program source. This problem already exists today, and this proposal makes it no worse.

5. Experience

The proposed design has field experience in a micro-controller environment. GCC was used, and the language support library was intentionally omitted. A no-op ::operator delete was provided by the users. The no-op ::operator delete enabled a small amount of code sharing between a hosted environment and this micro-controller environment. Some shared code involved classes with virtual destructors.

6. Polling history

6.1. Aug 19, 2020, EWG, Telecon

After updating wording for “either/of”, mandates, and talking to SG10 about the feature test macro, P2013 is tentatively ready to be forwarded to CWG. Walter volunteers to check that this is done.

SF/F/N/A/SA

2/16/1/0/0

6.2. Feb 14, 2020, EWG, Prague

We are interested in freestanding having an optional operator new, please come back with wording

SF/F/N/A/SA

8/10/7/0/0

6.3. Feb 12, 2020, EWGI, Prague

Given the time constraints of the committee, should we spend additional committee effort on P2013?

SF/F/N/A/SA

7/6/1/0/0

Is a Feature test macro a valuable addition to this paper?

SF/F/N/A/SA

0/5/5/2/0

Do we believe that P2013 is sufficiently developed to be seen by EWG?

SF/F/N/A/SA

5/8/0/0/0

6.4. Jan 8, 2020 SG14 Telecon

Forward P2013 as is with the minor editing quotes

SF/F/N/A/SA

9/10/0/0/0

approves to go to EWG

7. Design Alternatives

7.1. Alternative 0: All-or-nothing allocating ::operator new, no-op default deallocation functions (Proposed above)

This option preserves much functionality, without using any novel techniques. See above for further explanation.

7.2. Alternative 1: Optional throwing ::operator news, no-op default deallocation functions

Rather than making all the replaceable allocation functions optional, we could make just the throwing ::operator news optional (array and single form, with and without align_val_t parameters). The library would still be required to provide the nothrow_t overloads.

The nothrow_t overloads are specified to forward to an appropriate throwing overload. That implementation would still be fine on a system without dynamic storage available. This alternative was not selected as it is more difficult to teach, and because the target audience would likely be astonished that the nothrow_t overload has a try/catch in it.

7.3. Alternative 2: No deallocation functions

The presence of the replaceable deallocation functions is implementation defined. virtual destructors will be ill-formed unless the implementation provides the deallocation function, the user provides a global ::operator delete function, or the user provides a class specific operator delete overload.

This alternative has the benefit of being zero overhead and very explicit, but it has troublesome consequences for implementations. There are several language support classes that have virtual destructors, and something would need to be decided for them. Notably, type_info and the exception hierarchy all have virtual destructors. The standard library implementers may be prohibited from providing operator new and operator delete overloads (conforming#member.functions). Alternatively, the facilities that require classes with virtual destructors could all be off-limits until operator delete was made available. This would eliminate many cases with exceptions, dynamic_cast on references, and typeid.

If we were to adopt this alternative, many users would provide a no-op ::operator delete in their code, giving their code the same semantics and trade-offs as the proposed solution.

7.3.1. Experience

This alternative has field experience. MSVC’s /kernel [kernel_switch] flag omits definitions for ::operator new and ::operator delete. Users of Clang and GCC can choose to not link against the language support library, and therefore not have ::operator new and ::operator delete support, as well as many other language support features.

7.4. Alternative 3: No deallocation functions and new ODR-used rules for virtual destructors

The presence of the replaceable deallocation functions is implementation defined. Change virtual destructors so that they generate a partial vtable and don’t ODR-use ::operator delete. Make new expressions ODR-use ::operator delete and complete the vtable.

7.4.1. How could this virtual destructor ODR-use change be implemented?

First, this is only a problem that needs to be solved on systems without a default heap. This means that typical user-mode desktop and server implementations would be unaffected.

Existing linkers already have the ability to take multiple identical virtual table implementations and pick one for use in the final binary. A potential implementation strategy is for compilers and linkers to support a new "weaker" linkage. When the default heap is disabled, the compiler would emit a vtable with a nullptr or pure virtual function in the virtual destructor slot. When new is called, a "stronger" linkage vtable would be emitted that has the deleting destructor in the virtual destructor slot. The linker would then select a vtable with the strongest linkage available. Today’s linkage would be considered "stronger". Only partially filled vtables would have "weaker" linkage.

7.4.2. ABI impact

Mixing multiple object files into the same program should be fine, even if some of them have a default heap and some don’t. All the regular / "strong" linkage vtables should be identical, and all the "weaker" linkage vtables should be identical. If anyone in the program calls any form of new, the deleting destructor will be present and in the right slot. If no-one calls new in the program, then no-one should be calling delete, and the empty vtable slot won’t be a problem.

Shared libraries are trickier. Vtables aren’t always emitted into every translation unit. Take shared library "leaf" that has a default heap. It depends upon shared library "root" that does not have a default heap. If a class with a virtual destructor is defined in "root", along with its "key function", then a call to new on the class in "leaf" will generate an object with a partial vtable. Calling delete on that object will cause UB (usually crashes).

Lack of a default heap should generally be considered a trait of the platform. Mixing this configuration shouldn’t be a common occurrence.

7.4.3. Experience

This alternative is novel, and does not have implementation or usage experience.

8. Wording

This is based on the Pre-Prague 2020-01 mailing, N4849.

8.1. basic.def.odr

Modify basic.def.odr/3.1

3.1 - A function is named by an expression or conversion if it is the selected member of an overload set (6.5, 12.4, 12.5) in an overload resolution performed as part of forming that expression or conversion, unless it is either:

3.1.1 -- a pure virtual function and either the expression is not an id-expression naming the function with an explicitly qualified name or the expression forms a pointer to member (7.6.2.1) . , or

3.1.2 -- a call to a replaceable global allocation function during the evaluation of a constant expression.

[Note: This covers taking the address of functions (7.3.3, 7.6.2.1), calls to named functions (7.6.1.2), operator overloading (Clause 12), user-defined conversions (11.4.7.2), allocation functions for new-expressions (7.6.2.7), as well as non-default initialization (9.4). A constructor selected to copy or move an object of class type is considered to be named by an expression or conversion even if the call is actually elided by the implementation (11.10.5).— end note]

8.2. basic.stc.dynamic

Modify basic.stc.dynamic/2
The On hosted implementations, the library provides default definitions for the global allocation and deallocation functions. Some global allocation and deallocation functions are replaceable (17.6.2). On freestanding implementations, the library provides default definitions for the non-replaceable allocation functions and all the global deallocation functions. It is implementation-defined whether a freestanding implementation’s library provides default definitions for the replaceable global allocation functions. Either all or none of the replaceable global allocation functions shall be defined by a freestanding implementation’s library. A C++ program shall provide at most one definition of a replaceable allocation or deallocation function. Any such function definition replaces the default version provided in the library (16.5.4.6). The following allocation and deallocation functions (17.6) are implicitly declared in global scope in each translation unit of a program.

8.3. expr.new

Modify expr.new/10
A new-expression may obtain storage for the object by calling an allocation function ([basic.stc.dynamic.allocation]). If the new-expression terminates by throwing an exception, it may release storage by calling a deallocation function. If the allocated type is a non-array type, the allocation function’s name is operator new and the deallocation function’s name is operator delete. If the allocated type is an array type, the allocation function’s name is operator new[] and the deallocation function’s name is operator delete[]. [Note: An A hosted implementation is required to provide default definitions for the global allocation functions ([basic.stc.dynamic], [new.delete.single], [new.delete.array]). A C++ program can provide alternative definitions of these functions ([replacement.functions]) and/or class-specific versions ([class.free]). The set of allocation and deallocation functions that may be called by a new-expression may include functions that do not perform allocation or deallocation; for example, see [new.delete.placement]. — end note]

8.4. new.delete

Modify new.delete

17.6.2 Storage allocation and deallocation [new.delete]

1 Except where otherwise specified, the provisions of 6.7.5.4 apply to the library versions of operator new and operator delete. If the value of an alignment argument passed to any of these functions is not a valid alignment value, the behavior is undefined.

17.6.2.1 Allocating forms [allocating.forms]

1 Odr-use of the allocation functions in this subclause results in undefined behavior unless a definition of the odr-used allocation function has been provided. [Note: On hosted implementations, the library provides default definitions of these allocation functions ([basic.stc.dynamic]).- end note]

17.6.2.1 17.6.2.1.1 Single-object forms [new.delete.single]

No changes

17.6.2.2 17.6.2.1.2 Array forms [new.delete.array]

No changes

17.6.2.3 17.6.2.2 Non-allocating forms [new.delete.placement]

No changes

17.6.2.4 17.6.2.3 Data races [new.delete.dataraces]

No changes

9. Alternative Wording

9.1. new.delete

[allocating.forms]/1 uses undefined behavior. Making the program ill-formed would be preferable, but we cannot use ill-formed to diagnose linker errors. The following is the wording approach to use if we let the ODR violation provide the normative backing for this design. This results in IF;NDR when no definitions are present.

17.6.2.1 Allocating forms [allocating.forms]

1 [Note: Odr-use of the allocation functions in this subclause results in a one-definition rule violation unless a definition of the odr-used allocation function has been provided. ([basic.def.odr]). On hosted implementations, the library provides default definitions of these allocation functions ([basic.stc.dynamic]).- end note]

10. Acknowledgments

Thank you to the many reviewers of this paper: Brandon Streiff, Irwan Djajadi, Joshua Cannon, Brad Keryan, Alfred Bratterud, Phil Hindman, Arthur O’Dwyer, Laurin-Luis Lehning, JF Bastien, Matthew Bentley, and Alisdair Meredith.

Thank you to Daveed Vandevoorde and Walter Brown for providing feedback on the wording.

References

Informative References

[FreeRTOS_StaticVDynamic]
FreeRTOS Documentation. Static Vs Dynamic Memory Allocation. URL: https://www.freertos.org/Static_Vs_Dynamic_Memory_Allocation.html
[KERNEL_SWITCH]
Microsoft Documentation. /kernel (Create Kernel Mode Binary). URL: https://docs.microsoft.com/en-us/cpp/build/reference/kernel-create-kernel-mode-binary
[KMALLOC]
kernel.org. kmalloc. URL: https://www.kernel.org/doc/htmldocs/kernel-api/API-kmalloc.html
[MSPools]
Microsoft Documentation. POOL_TYPE enumeration. URL: https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/wdm/ne-wdm-_pool_type
[P1105R1]
Ben Craig; Ben Saks. Leaving no room for a lower-level language: A C++ Subset. URL: https://wg21.link/P1105R1
[P1642R1]
Ben Craig. Freestanding Library: Easy [utilities], [ranges], and [iterators]. URL: https://wg21.link/P1642R1
[THREADX]
THREADX(R) RTOS - Royalty Free Real-Time Operating System. URL: https://rtos.com/solutions/threadx/real-time-operating-system/
[THROWING_NEW]
Microsoft Documentation. /Zc:throwingNew (Assume operator new throws). URL: https://docs.microsoft.com/en-us/cpp/build/reference/zc-throwingnew-assume-operator-new-throws?view=vs-2019